+971 56 899 7666
Mon-Fri
08am - 05pm
One-touch operation with a single button press allows for ease of use by anybody. Can be used for a wide range of applications such as wastewater monitoring and component quality control.
Benchtop Water Quality Meters Stress-free measurement, high-end model
Water quality analysis is repeatedly performed in laboratories on a daily basis. Our high-end benchtop model was developed to provide simplicity with excellent on-site usability – from operation and maintenance through to troubleshooting.
Benchtop Water Quality Meters Stress-free measurement, high-end model
Water quality analysis is repeatedly performed in laboratories on a daily basis. Our high-end benchtop model was developed to provide simplicity with excellent on-site usability – from operation and maintenance through to troubleshooting.
Benchtop pH/ORP/Ion/Temperature Meter
Benchtop Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter
Handheld Water Quality Meters
Handheld pH/ORP/Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter
The Jenway 6300 UV/Visible Spectrophotometer is a high quality, low cost unit which is ideal for spectrophotometric applications in schools & colleges. The spectrophotometer has a large wavelength with Absorbance, %T and concentration modes. It has a multi-parameter display with wavelength and photometric readouts and it utilises a high quality, pulsed xenon lamp.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
Integrated RCMSi Technology for Remote Calibration
Automatic and Non-subjective Colour Measurement
Consistent Data Compliant with International Standards
Very Rugged, Chemically Resistant, Steel Construction
Digital temperature and timer control.
Controllable temperature from 35 °c to 200 °c.
Stability ±1 °c, up to 100 °c. Homogeneity ±2 °c, up to 100 °c. Set error ±1 °c. Resolution 1 °c.
Microprocessor control with digital display of temperature and co2. Adjustable temperatures from ambient +5 °c to 50 °c
stability: ±0.2 °c, up to 37 °c. Homogeneity: ±0.5 °c, up to 37°c. Resolution: 0.1 °c. Alarm range: from ambient+5 °c to 50 °c.
Resolution: 0.1 °c.
Co2 range: from 0 to 20%.
Stability: ±0.3%.
Resolution: 0.1%
“COM-85” MODEL: PRODUCTION 85 kg-24 HOURS
Featuring a high-resolution colour touch screen, Equinox analytical balances provide intuitive operation and readily accessible functions. Equinox delivers exceptionally precise results for labs, science education and production facilities.
CBX portable balances offer a standard rechargeable battery and can be charged with a USB cable. Sturdy construction and easy operation deliver reliable weighing and counting results for labs, office, production and more.
With simple operation and rapid response time, PMB offers top value in moisture analysis. USB and RS-232 interfaces facilitate connectivity, while another USB port allows storage of test programs and data on flash drives.
Electronic temperature control of speed and power to the heater.
For speeds from 60 to 1600 rpm.
For adjustable temperatures from 50 oc to 350 oc (200 oc with external probe). Precision ±2 °c. Maximum stir volume: 10 litres.
Plate ø is 14,5 cm.
With renovable safety ring against spillage.
The instrument features a large, backlit display, a real time clock, automatic data logging as well as the ability to export data to a PC or printer using the 900 Series Data Hub for infrared data transfer. Features for the 910 to quickly and accurately measure COD include:
Automatic data storage; 16 data-sets with date and time stamp
Large, backlit LCD display
IP68 waterproof case; easy to hold or set on benchtop; floats
Innovative light shield prevents moving parts or separate pieces that can easily be broken or lost
User-calibration to any government or organizational standard (for example N.I.S.T. or ISO)
Resolution can be improved for specific range requirements
Known interferences can be adjusted for the sample
Auto shutoff extends battery life
2-year warranty
The DRB200 thermostat ideally complements the Hach reagents (COD, TOC, Test ‘N’ tube). Two separately controllable heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. The heating blocks heat from ambient to 150 degrees in less than 10 minutes. The DRB200 has a digital timer with an automatic switch-off and acoustic signal and the two transparent splash protection lids close the thermostat while it is heating. The integrated anti overheating feature and the insulated external shell provide additional safety. The reactor will emit an audible signal and automatically shut down at the end of the run. The reactors only support the 13mm diameter TNTplus vials and the 16 mm Hach chemistry vials.
A variety of freezer models for subzero degree storage of your sensitive lab material with innovative defrost system.
with optional recorder
Model Name : FCG/FMG models
Specially designed for large volume and fast drying application. (max. 760L and 300°C)
Offering rapid heating performance as well as uniform temperature distribution, these heavy-duty ovens are ideal for obtaining quick test results.
Temperature range from ambient +5°C to 70°C.
Microprocessor PID control / Temperature calibration / Automatic tuning.
Vibration-free design ideal for yeast cultivation.
– Air-jacked natural convection is beneficial for Uniform temperature distribution and minimal sample contamination caused by external air intrusion.
Durable incoloy heating element with radiator fans for efficient heat dissipation.
Our Kjeldahl distillers work according to the internationally recognized Kjeldahl method, a reference procedure to analyze nitrogen and protein content in several fields of application.
Our Kjeldahl digesters represent a compact block digestion system, standing out for its efficiency, versatility, and scalability to perform safe Kjeldahl digestions. This internationally recognized reference method is used to analyze nitrogen and protein content in various fields of application. Moreover, these digesters are utilized for sample pretreatment (hydrolysis) for subsequent fat extraction and soil digestion for metal analysis.
Our Soxhlet and Randall Extractor is a fat extraction system specially optimized to determine crude fat or other components soluble in organic solvents according to the universally known solvent extraction method, including the Soxhlet,Randall and Twisselmann methods.
Measuring range: from 0.2 to 200 mg of Kjeldahl Nitrogen. Programmable distillation time.
Nitrogen recovery >99.5%
Distillation speed: from 35-40ml/minute
Typical distillation time: from 7-10 minutes.
Water consumption rate: from 80-100 litres/Hr.
Steam generator water consumption: 2,5 Litres/ Hr.
Water reservoir for steam generator: 6 litres
NaOH reservoir: 2 Litres.
Temperature range 2 °C to 40 °C, continously adjustable in steps of 0.1 °C
Low power consumption
Illuminated LED display of preset and current temperatures
Ideal for BOD determination at 20 °C
DBO5 Sensor 6
Speed can be changed during the run
Illuminated back panel to simplify sample observation
Stirring rods adjustable in height without tools
Reliable and repeatable results from VELP stirring quality
Precise speed from an electronically controlled DC gear motor
Strong resistance to chemical and mechanical corrosion
Independently selectable speeds 10-15-30-45-60-90-120-150-200-300 rpm
Same product can be submitted to different conditions in parallel
Choice of 4- or 6-place models
Independent heating control for each position.
2 height and angle adjustable bars to support condensers or other glassware for digestion or extraction.
External case made of AISI 304 stainless steel.
Safety earth strip fitted.
The muffle furnaces L 3/11 – LT 60/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. The muffle furnaces come equipped with either a flap door or lift door at no extra charge.
Tube Furnaces up to 1800 °C
Using a wide range of accessories, these professional tube furnaces can be optimally tailored for your process.
BLOCK DIGESTER (MINERALISATION) WITH PROGRAMMABLE TEMPERATURE CONTROL AND GLASSWARE
2100Q Portable Turbidimeter (EPA), 0-1000 NTU
The 2100Q Portable Turbidimeter is ideal for use in the field or around the plant. It is easy to carry around and take multiple measurements from various collection points in your treatment process. With its intuitive user interface, the 2100Q makes it easy to take measurements and perform calibration and verification. Storing and transferring data from a portable turbidimeter has never been easier.
Optimal photosynthesis condition guaranteed when using our plant growth chamber.
Ample capacity, maximum capacity of 1000L to satisfy user’s plant growth needs
Microprocessor PID control / Temperature calibration / Automatic tuning.
Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
Water recycling and filtering system reduce water consumption for longer operation.
Air-tight door closure with perfect sealed packing.
– Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
– Two-point door latch also enhances tightness to door closure.
Energy efficiency is achieved by optimization of the insulation system.
– Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.
Minichillers are a space-saving, low-cost and environmentally friendly cooling solution for numerous laboratory applications. By saving cooling water, Minichillers pay for themselves after only a short time.
Cooling circulators of the economically priced KISS model series for cooling tasks down to -30°C. The units are suitable for many typical heating and cooling tasks such as sample temperature control, material testing and quality control.
Visco baths are suitable for measurement tasks using capillary viscometers or for use of densitometers. The devices are fitted with transparent polycarbonate baths and have a cooling coil for countercooling as standard. Various functions can be activated via E-grade.
Flow Rate (max.): 5.5 l/min
Ultimate Vacuum (max.): 160 mbar (abs.)
Clean, 100% oil-free operation
Corrosion-resistant
Compact, quiet and reliable
Small footprint
Flow Rate: 1–100 ml/min
Pressure (max.): 6 bar (rel.)
Small footprint
Simple, intuitive operation
Manual, analog control and RS232 interface
Self-priming, can run dry
A trace fluorine concentration monitor for managing ppm-levels of hydrofluoric acid in sulfuric acid and hydrogen peroxide during the wet processes.
Enabling effective process management by continuously and stably measuring the fluorine concentration in sulfuric acid, hydrogen peroxide, and trace hydrofluoric acid at the ppm level. This is particularly valuable for the removal of polymer residues following etching processes.
High purity distilled water – conductivity approx 2,5 μS/cm
Built-in 8 litter storage tank
Automatic water switching and power cut-off
Electronic water level switch
Automatic thermostatic cut-off safety system
Hearing element made of high quality stainless steel
All material contact water made of stainless steel AISI 304
Easily accessed evaporator & storage tank for effortless cleaning and maintenance
CE Certificate
2-years warranty
Made completely from borosilicate glass with protective case that has easy access to
the heater elements and glass parts.
Automatic function and continuous production.
Produces high quality double distilled water free from pyrogen and metallic ions.
Distillation capacity: 4 litres/hour.
Made entirely of borosilicate glass.
Functions: automatic with continuous water production. Produces distilled water of a high purity, free of pyrogens and metal ions.
Equipped with quartz heater elements and protection device using a safety thermostat that is activated in the case of low water pressure to the condenser or boiler unit. The unit automatically reactivates when the water pressure is restored.
Suitable for wall mounting.
Automatic Melting Point Apparatus “WRS-1B”
Automatic determination no visual control required.
Research laboratories, quality control. Test and control of purity after synthesis in pharmaceutical laboratories.
CDR FoodLab® is the chemical analysis system for quality and process control that allows you to determine a wide range of parameters of many foods, animal feeds and pet foods. Discover all possible applications.
Intuitive and powerful, the new B-ONE PLUS
will surprise you with its extended measuring
range in LR version or with its optional
temperature sensor.
+ 7’’ Touch Screen.
+ Easy attachment of your spindle.
+ Available in standard and high sensitivity versions.
+ Data memorization and USB transfer.
+ Viscosity limits according speed/spindle.
Refractometer PAL-3
Designed with a full Range (Brix 0.0 to 93.0%), the PAL-3 works perfectly for measuring almost any samples.This model has been modified to have a high measurement accuracy at +/-0.1% Brix, the highest accuracy model in PAL series.
This is a hybrid of refractometer and salt meter which has an optical prism is used to measure the concentration (Brix) and titanium electrode is used to measure the salt contents.
It enables to check the balance between concentration(Brix) and salt that is the decisive factor for taste in foods in general.
In addition, we pursued the elimination of the dilution which is required for salt measurement especially for the concentrated samples like sauce.
Now, the salt concentration of samples with high concentration such as sauce can be measured without dilution.
The most accurate refractometer in the world is now even more stylish, smart, and functional, Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze. The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability.
This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
MASTER-53α are capable of measuring not only various kinds of juice, coffee, and other beverages but also processed food such as sauce, ketchup, low calorie jam, etc.These are an Automatic Temperature Compensation (ATC) model with water resistant feature (IP65).The MASTER-53α is made of metal, and the MASTER-53Pα is plastic. The specifications are exactly the same. For salty and acidic samples, choose the plastic body, MASTER-53Pα.
The EZ-200 is our latest water activity meter.
It features a color touch panel and is accurate,
easy to use, and simple to maintain.
Features a color touch panel that provides intuitive controls. Allows for wide-ranging measurements between Aw 0.10 to 0.98 to be performed in just 10 minutes, a reduction in time of 30% compared to previous models. Allows for accurate measurements regardless of whether the sample is a solid, liquid, or powder.
